200 series full GAZ coil over kit

£100 refund on return of your old struts

(note 3-4 weeks production time)

Volvo 200 series full coilover conversion kit including the following

1)Shortened Front coilover struts for Volvo 200 series with 65mm ID springs.
2)Rear adjustable short dampers
3) adjustable rear spring perches with springs

1. Front and rear dampers adjust bump and rebound from a single control knob on the side of the unit.

2. Struts have 62mm bodies for increased oil capacity. These units are fitted with 22mm diameter induction hardened piston rods that are hard chrome plated for strength and durability.

3. All dampers have multi lip sealing. The outer seal is a metal encased wiper to clean the piston rod. This in turn extends main seal performance and oil retention under extreme conditions.

4. All the Gold range are fitted with a gas cell in the outer reservoir and filled with a high viscosity index multi grade oil to prevent cavitation and rede fade in motor racing conditions.

5. The coilovers and telescopic units in this range utilise lightweight billet alloy components where possible, i.e. bases, end fittings, seats, lockrings, rod guides and gland nuts. The outer tube is steel with a nickel coating to provide the best anti corrosive finish possible. All outer alloy components are anodised.

6. A full range of springs are stocked for road and motorsport use.

Fitting notes

Tracking must be set after fitting

A £100 deposit is taken against the ruturn of you old struts. The struts must be in servicable condition, corroded or broken spring cups are acceptable. Hoverer damage to the spindle or bent spindles will be refused as they will not be suitable for conversion.
Thedepositisfullyrefundedonreceiptofyourcoreexcange struts.

1. Front and rear units adjust bump and rebound from a single control knob on the side of the unit.

2. Struts and semi struts have 62mm bodies for increased oil capacity. These units are fitted with 22mm diameter induction hardened piston rods that are hard chrome plated for strength and durability.

3. All units have multi lip sealing. The outer seal is a metal encased wiper to clean the piston rod. This in turn extends main seal performance and oil retention under extreme conditions.

4. All the Gold range are fitted with a gas cell in the outer reservoir and filled with a high viscosity index multi grade oil to prevent cavitation and rede fade in motor racing conditions.

5. The coilovers and telescopic units in this range utilise lightweight billet alloy components where possible, i.e. bases, end fittings, seats, lockrings, rod guides and gland nuts. The outer tube is steel with a nickel coating to provide the best anti corrosive finish possible. All outer alloy components are anodised.

6. A full range of springs are stocked at the factory for road and motorsport use.