2pcs clutch kit
Power / Performance: Approximately 550nm
Fitment.
850 and 70 series platform with single mass flywheel
Redblocks (B200/230) with TTV Flywheel
Gearbox M90 only
Sinter paddle friction plate with sprung center
Diameter: 240mm
Splines: 1x20
Thickness: 8,1mm
Number pucks: 6
Reinforced Pressure Plate
Diameter: 240mm.
Increased clamping force
Release bearing not included
NOTE: Because the paddle plate is 1mm thicker than the original the pressure plate must be spaced off the flywheel by 1mm or full clamping force will not be achieved at the clutch is likely to slip. We have the shims listed on our shop.
Due to the increased strength of the clutch the pedal will be harder and the cylinders and hoses need to be in good working order
Updating Order Details
Please do not refresh or navigate away from the page!