Categories
Newsletter
360 motorsport engine mounting brackets
Product Code: CS360EMK Units in Stock: 0
360 motorsport engine mounting brackets Summary
Uprated Motorsport 360 engine mount brackets
This kit is designed to replace the original engine mounts and brackets. They bolt into the original position and use all the original threaded holes.
An ideal solution to gain more clearance with a Turbo conversion or just to replace a failed set of mounts.
The kit consist of two brackets. You will also need to buy either the rubber or PU bushes to go with them. Replacement PU mounts are available as a separate item should one ever fail.
To install these mounts you will need the engine side brackets from either a 740 or 940 with a B200 or B230 engine
940 brackets and the mounting rubbers are sold separately.
Supplied in bare steel. Will need cleaning and painting
This kit is designed to replace the original engine mounts and brackets. They bolt into the original position and use all the original threaded holes.
An ideal solution to gain more clearance with a Turbo conversion or just to replace a failed set of mounts.
The kit consist of two brackets. You will also need to buy either the rubber or PU bushes to go with them. Replacement PU mounts are available as a separate item should one ever fail.
To install these mounts you will need the engine side brackets from either a 740 or 940 with a B200 or B230 engine
940 brackets and the mounting rubbers are sold separately.
Supplied in bare steel. Will need cleaning and painting
Updating Order Details
Please do not refresh or navigate away from the page!
Customer Reviews
1 review(s) posted (write review)
Fixed the problem - Andrew - 22 April 2015
My 360 had been getting worse and worse with the engine resting on the crossmember where the original engine mounts had failed. I was made up to find this site and all the parts that were available. I thought I might of had to scrap my car due to not being able to find any motor mounts.
The mounts arrived as the photos looking a little rough and ready. They are a little on the heavy side compared to the original brackets so over engineered.
Fitting went all ok and the car now vibrates a lot less than it used to