Categories
Newsletter
B23/230 stage 3 Turbo camshaft
Product Code: 04263 Units in Stock: 0
B23/230 stage 3 Turbo camshaft Summary
Stage 3 turbo T3 Suitable for engines with larger Turbos and increased boost pressure, providing substantial increase in rev range and more power at higher RPM's. Has good idle and low speed. Also suitable as a very tractable NA cam.
The camshafts are ground on the new Volvo Blanks
(We do not need any old camshaft in return - this is not a regrind)
Opening Duration 280 degrees
cam lift 12.15mm
Lobe center line angle 112 degrees
TDC lifting about 2.5-2.7mm.
Valve clearance 0.35 mm
Lash cap required: Yes; 3mm thick is recommended
TDC lift is specified with the valve clearance and is set as follows. Set engine piston top position (TDC) (exhaust is about to close and the intake is opening) .Inlet valve will then open the specified value.
The value may be slightly adjusted after a test run for the best results. Adjustable cam gear facilitates the optimization of this
The camshafts are ground on the new Volvo Blanks
(We do not need any old camshaft in return - this is not a regrind)
Opening Duration 280 degrees
cam lift 12.15mm
Lobe center line angle 112 degrees
TDC lifting about 2.5-2.7mm.
Valve clearance 0.35 mm
Lash cap required: Yes; 3mm thick is recommended
TDC lift is specified with the valve clearance and is set as follows. Set engine piston top position (TDC) (exhaust is about to close and the intake is opening) .Inlet valve will then open the specified value.
The value may be slightly adjusted after a test run for the best results. Adjustable cam gear facilitates the optimization of this
Updating Order Details
Please do not refresh or navigate away from the page!
Customer Reviews
No Reviews Posted Yet - be the first!(write review)