Budget 200 series front DC coilover struts with bearing mounts

£100 refund on return of your old struts

Shortened Front coilover struts for Volvo 200 series fitted with 65mm ID coilover springs and pillow ball bearing mounts.



These DC coilovers are built with a shorter closed length and shorter open length to allow for extreme lowering. Lowering range between 50 and 150mm
The spring platform is adjustable to change ride height and set corner weights..

1. Front units adjust bump and rebound from a single control knob on the top of the unit. 24point adjustment

2. Double height adjustable

 

Fitting notes

Tracking must be set after fitting

A £75 deposit is taken against the return of you old struts. The struts must be in servicable condition, corroded or broken spring cups are acceptable. Hoverer damage to the spindle or bent spindles will be refused as they will not be suitable for conversion.
Thedepositisfullyrefundedonreceiptofyourcoreexcange struts.



The 1982-on struts feature a larger diameter stub axle . How to identify: Stub diameter for the outer bearing (the Small one) increased from Ø19 to Ø22 and the inner bearing (the Big one) from Ø31.8 to Ø35 - the transition diameter from stub axle to strut body (the most important dimension for strength) increased from Ø42 to Ø45 - therefore all changes feature a diametrical increase of 3 mm

If your car is pre 82 we are able to supply the smaller spindles, please check availablity before ordering