Categories
Newsletter
Stage 3 Turbo cam kit
Product Code: T3KIT Units in Stock: 0
Stage 3 Turbo cam kit Summary
Stage 3 turbo T3 Suitable for engines with larger Turbos and increased boost pressure, providing substantial increase in rev range and more power at higher RPM's. Has good idle and low speed. Also suitable as a very tractable NA cam.
The camshafts are ground on the new Volvo Blanks
(We do not need any old camshaft in return - this is not a regrind)
Opening Duration 280 degrees
cam lift 12.15mm
Lobe center line angle 112 degrees
TDC lifting about 2.5-2.7mm.
Valve clearance 0.35 mm
Lash caps suppled 3mm thick
TDC lift is specified with the valve clearance and is set as follows. Set engine piston top position (TDC) (exhaust is about to close and the intake is opening) .Inlet valve will then open the specified value.
The value may be slightly adjusted after a test run for the best results. Adjustable cam gear facilitates the optimization of this
Kit includes
1pc Stage 3 Cam
8pcs 3mm lash caps
1pc Rocket cover gasket
1pc Adjustable cam gear (select in options round or Square tooth)
The camshafts are ground on the new Volvo Blanks
(We do not need any old camshaft in return - this is not a regrind)
Opening Duration 280 degrees
cam lift 12.15mm
Lobe center line angle 112 degrees
TDC lifting about 2.5-2.7mm.
Valve clearance 0.35 mm
Lash caps suppled 3mm thick
TDC lift is specified with the valve clearance and is set as follows. Set engine piston top position (TDC) (exhaust is about to close and the intake is opening) .Inlet valve will then open the specified value.
The value may be slightly adjusted after a test run for the best results. Adjustable cam gear facilitates the optimization of this
Kit includes
1pc Stage 3 Cam
8pcs 3mm lash caps
1pc Rocket cover gasket
1pc Adjustable cam gear (select in options round or Square tooth)
Updating Order Details
Please do not refresh or navigate away from the page!
Customer Reviews
No Reviews Posted Yet - be the first!(write review)